Liquid Crystalline Waterproofing Solution
Advanced crystalline waterproofing liquid that penetrates and seals concrete pores permanently. Ideal for roofs, basements, water tanks, and swimming pools.
Packaging
5 L Jerry Can / 20 L Drum
Certified Waterproofing
Meets international standards for hydrostatic resistance
WAPRO Water Proofer is an advanced crystalline waterproofing compound that penetrates deep into concrete and masonry substrates to permanently seal micro-cracks and pores. Unlike surface coatings, WAPRO becomes an integral part of the structure, self-healing minor future cracks through continued crystalline growth.
Its excellent resistance to hydrostatic pressure (up to 5 bar) makes it the first choice for below-grade structures, water tanks, swimming pools, flat roofs, and bathrooms. Easy to apply by brush, roller, or low-pressure spray with no primer required.
Compliance: Tested to ASTM C1202 for chloride ion penetration resistance. Meets BS 8102 waterproofing standards.
| Standard Packaging | 5 L Jerry Can / 20 L Drum |
|---|---|
| Type | Liquid Crystalline Waterproofer |
| Coverage | 1 L per 5 m² (2 coats) |
| Application Method | Brush, Roller, or Spray |
| Drying Time per Coat | 2 – 4 Hours (at 25°C) |
| Minimum Coats Required | 2 Coats |
| Hydrostatic Resistance | Up to 5 Bar |
| VOC Content | Low VOC Formula |
| Shelf Life | 24 Months (Sealed, in dry conditions) |
Clean the substrate thoroughly. Remove all dust, grease, loose particles, and efflorescence. Fill any large cracks with repair mortar and allow to cure.
Dampen the substrate with clean water. For WAPRO liquid, apply the first coat directly. For powder products, mix per specified ratio until lump-free.
Apply first coat evenly using a brush or roller, working product into the surface firmly. Ensure complete coverage with no pinholes or dry spots.
After first coat is touch-dry (2–4 hrs), apply second coat in the opposite direction. Allow full cure before tiling, backfilling, or flood testing.
Professional-grade waterproofing for critical structures.
Ponding water protection.
Below-grade structures.
Permanent wet environments.
Potable water safe grades.
Our technical team will assess your project and recommend the right waterproofing system for maximum performance and longevity.